On this page you will find tools that we have tried in the past or that we may still work with. We will share our experiences about them. Do you want us to try out your tools and maybe even keep working with them than contact us.
Brickcutter
We tried this brick cutter and we really liked it. The chopper can be adjusted to size, both straight and oblique. We dont use the chopper when the bricks are to hard.
Click on the picture to see where you can order the cutter.
Wire clamp
We have used this wire clamp and we really liked it. We use this when we can't put the wire directly on our profile. The wire can be clamped directly to the masonry with this and stays in place very well. We've been using this one for a while and its continues to perform well. doen.
​
Click on the picture to see where you can order the wire clamp.​
Layerbar
The layer bar is very useful for drawing off divisions. We regularly use this lath because the most common sizes that we encounter in the Netherlands with masonry are listed here. Because of this bar you always have the exact measurements to put the distribution with, so that no mistakes are made. Very handy!
​
Click on the picture to see where you can order the layerlath.​
Dutch Trowel
We actually use the Dutch trowel the most during the masonry day. We have been working with this model trowel since we started our masonry career. We still think this is a very nice model after using it for years.
​
Click on the picture to see where you can order the trowel.
Brickclamp
​
We use the brick clamp when we want to move stones quickly. The brick clamp has several positions from 28 cm to 44 cm to be able to move several stones in 1 grip. The brick clamp in combination with a brick barrrow is a good combination to move the stones quickly and get them in the right place.
​
Click on the photo to see where the brick clamp can be ordered. ​
All links are affiliate links.